Contact Us:

Please feel free to contact us with any inquiry you may have.

E-mail us with your specifications & Drawings for an urgent quote to

Contact Us @

 +65 8808 4169

Maintenance Hotline @ 
 +65 8808 4169

Or simply fill out the contact form below and we will get back to you as soon as we can.

Flap Barrier (Speed Gate)

Flap Barrier (speed gate) is generally used to in access control of public passages. The mechanical part of the flap barrier contains an emergency control device, which allows automatic opening of the two wings in case of power failure; when power supply is resumed, the two wings will be reset automatically. The flap barrier has different optional configurations, applicable to all building conditions and capable of providing a solution for the control of all kinds of passage entrances and exits.

Features & Functions

  1. Fault detection and alarm functions, easy to use and maintenance
  2. The running status can be programmed and controlled with the built-in keyboard on the main board
  3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset)
  4. Anti-breakthrough function. The gate is locked automatically until opening signal received
  5. Synchronization functions (for dual gate equipments)
  6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically
  7. Gate can be set as normally open or normally closed
  8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
  9. Direction can be set as single-direction or bi-direction
  10. LED direction indicator
  11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements
  12. Alarm function, in case of illegal intrustion and reverse intrusion, etc.
  13. Counter function (optional)
  14. Support infrared photocell for anti-pinch and reset function